Description

Technical Parameters

Introduction

The Anti-slip plywood is a highly durable, resin-coated structural wood panel featuring a raised, textured pattern on one or both faces.

Product Specifications

Item	Specification
Slip Resistance	R11–R13 certified (DIN 51130 / BS 7976-2)
Film Surface	220g/m² or 240g/m² phenolic wiremesh/hexagonal texture
Abrasion Resistance	>3,500 cycles (EN 438-2)
Waterproof Bonding	Phenolic WBP adhesive, 72-hour boiling test passed
Temperature Range	-30°C to +60°C
Core Material	Birch / Birch-Pine / Eucalyptus veneer
Bending Strength	MOR ≥35 N/mm² (parallel), ≥22 N/mm² (cross grain)
Thickness Tolerance	±0.3mm
Structure	18mm panel with 13 plies
Point Load Capacity	Up to 850 kg

Construction Applications

Scaffolding Platforms: Wiremesh surface with DIN 51130 R13 slip-resistance rating, engineered for multi-story systems.

Access Ramps: Pedestrian and light-machinery transit flooring.

Formwork Concrete Decking: Alkali-resistant, waterproof walking surfaces certified for 15–20 concrete pouring cycles under standard maintenance.

Modular Unit Flooring: Subfloors and exposed flooring for temporary container offices and mobile tool storage, utilizing 120g/m² phenolic coating.

Vehicle & Trailer Beds: Impact-resistant, high-load flooring for flatbed utility trailers transporting compactors and excavators.

Custom Options

Standard Dimensions: Available in standard industrial sheet sizes: 1220 x 2440mm, 1250 x 2500mm, and 1500 x 3000mm.

Thickness Range: Available in 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, and 27mm, manufactured to EN 315 thickness tolerance standards (±0.5mm).

Color Variations: Available in dark brown, black, stone gray, and safety yellow for on-site hazard zoning and compliance.

CNC Processing: Factory-direct custom edge-profiling (tongue and groove), countersunk drilling, and layout routing based on approved architectural CAD drawings.

Minimum Order Quantity (MOQ): 1 Full Container Load (FCL), delivering 22–24 metric tons per maritime shipment.

Quality Control

Moisture Stabilization: Inner plies are kiln-dried to a strict 6% to 10% moisture content range to prevent steam blistering, warping, and delamination.

Hot Pressing: Panels bonded at 130°C to 140°C with exterior-grade WBP phenolic glue, passing the 72-hour boiling test and meeting EN 314-2 Class 3 bonding standards.

Surface Calibration: Industrial double-sided sanding paired with automated laser sensors to ensure consistent face-to-back calibration across batches.

Batch Traceability: Every shipment is stamped with a tracking number linked directly to its raw material logs and factory laboratory test reports.

Packaging & Logistics

Reinforced Packaging: Secured on solid wood runners with multi-layered plywood edge protection on all sides to withstand multi-layered forklift cross-docking.

Moisture Protection: Pallets sealed in UV-resistant, multi-layer stretch wrap with reinforced edge protectors to block humidity and salt spray during sea transit.

Container Volumetrics: Standard 40ft High Cube (HQ) containers accommodate 18 to 20 pallets (400 to 850 sheets, depending on thickness specifications).

Export Documentation: Full provision of clean Bill of Lading (B/L), Certificate of Origin (C/O), Packing List, Commercial Invoice, and Phytosanitary Certification.

Compliance

Structural Certification

Fully compliant with CE Marking requirements under EN 139860.

Formaldehyde Emissions

Certified to European E1 and US CARB Phase 2 / EPA TSCA Title VI standards.

Timber Traceability

Chain-of-custody documentation available for 100% FSC or PEFC certified timber.

Third-Party Audits

Batch samples regularly verified by independent, accredited testing institutions, including SGS, TÜV, or Intertek.

Fire Rating

Rated Class D-s2, d0 according to EN 13501-1, with flame-retardant upgrades available for high-risk project specifications.

Technical Integration

Technical Data Sheets (TDS) and Material Safety Data Sheets (MSDS) provided immediately for engineering submittal sign-off.

FAQ

Q: How long can anti-slip plywood be used on construction sites?

A: Under normal construction site conditions, each panel can typically withstand 15–20 concrete casting cycles.

Q: Does the cut edge need to be sealed after trimming?

A: Yes. Any cut edge should be resealed with a waterproof phenolic edge sealant before installation to prevent moisture penetration and maintain the panel's bonding performance throughout its service life.

Q: How should the plywood be stored before installation?

A: Panels should be stored flat on level supports, protected from direct sunlight and standing water, with adequate ventilation.

Q: What support spacing is recommended during installation?

A: For 18 mm panels used as working platforms, support beams are typically spaced 400–500 mm apart, depending on the expected load.

Q: Is the plywood resistant to construction chemicals?

A: Yes. The phenolic film surface resists common construction materials, including wet concrete, cement slurry, hydraulic oil, diesel fuel, and most mild alkaline cleaning agents.

Q: What warranty is provided for the product?

A: The plywood is supplied with a 12-month manufacturing warranty covering bonding integrity, delamination, and manufacturing defects under normal installation, handling, and storage conditions.

Hot Tags: anti-slip plywood for construction site, China anti-slip plywood for construction site manufacturers, suppliers, factory, 18mm Shuttering Plywood Sheet 4x8, Bleached Poplar Veneer Plywood for Laser Cutting Furniture, Film Faced Plywood 18mm Construction Platform, High Gloss Melamine Mdf Sheet 4x8 for Furniture Decoration, Standard Film Faced Plywood, Yellow Shuttering Plywood for Construction

Anti-Slip Plywood for Construction Site